WCA-200

Heavy Duty Ring Gear Driven Conveyorized Fully Automatic

Capacities
Production:
  • 60 loads per hour
  • NOTE: Base on load size and configuration
Load Size:
  • 50" (W) x 50" (L) x 80" (H)
Load Weight:
  • 4,000 lbs.
Machine Dimensions:
  • 198" (W) x 137" (L) x 102" (H)
Features
Structure:
  • Formed steel tower consisting of 11 gauge front section and 14 gauge back cabinet section with lockable door
  • Forklift Portable base design (from both ends)
  • Heavy duty structural steel construction
  • Lag bolt brackets to secure machine to the floor
Turntable:
  • Max. 15 RPM variable speed
  • 1 ½ HP AC motor with variable frequency drive
  • Heavy duty Ring Gear Bearing drive
  • Automated Lube Station.
  • Electronic soft start/stop
  • Positive turntable alignment controlled by proximity sensor
  • Electric brake
Turntable Conveyor:
  • 77" dia. ½" steel plate
  • 2 ½" dia. rollers on 3" centers
  • 1/8" wall cold rolled electric welded steel rollers
  • All rollers driven (including all surround rollers)
  • 52" BFR (between frame rails)
  • ¾ HP AC motor with variable frequency drive
  • Electric soft start/stop
  • #40 chain drive with contour driven rollers
  • Heavy duty cast iron flange mounted bearing
Conveyor:
  • 5' in / 5' out powered contoured conveyor
  • Standard: Pass height 18", other pass heights available *
  • 1/8" wall cold rolled electric welded steel rollers
  • 2 ½" dia. rollers on 3" centers
  • 52" BFR (between frame rails)
  • All rollers driven via #40 chain
  • ¾ HP AC motor with variable frequency drive including fwd/rev manual jog
  • Heavy duty structural steel design
  • Heavy duty cast iron flange mounted bearings
  • Fix 35 FPM conveyor speed, other speeds available *
  • Additional conveyors and other types available upon request. *
Film Delivery System:
  • 20" NO-THREAD® Powered Pre-Stretch Carriage
  • ½ HP AC Motor with Variable Frequency Drive
  • 50% to 300% Pre-stretch Ratio (preset to customer specifications, Std. 200%)
  • Electronic film tension control with analog sensor
  • Sensing device for film out/broke
  • Lexan roller cover
  • Film force release for easy pull at start and end of cycle
Film Carriage Drive:
  • ¾ HP AC Motor with Variable Frequency Drive
  • Two #50 Chain Carriage Lifts for Safety
  • Dual ½" CRS ways with UHMW-PE Carriage Glides
Film Tail Treatment:
  • Automatic film clamping
  • Pulsed controlled cutter
  • Film alignment arm
  • Brush-on film tail treatment, Heat Seal available *
Controls:
  • Siemens PLC S7-300
    * Allen Bradley SLC 5/03 PLC, also available at minimum upcharge
  • 24V control system
  • Current overload protection
  • Autoheight sensing photoeye with on/off mode
  • Power on/off lockable switch and indicator light
  • Three emergency E-stop stations
  • Siemens monochrome Touch Panel
  • Separate up and down carriage speeds
  • Separate top and bottom wrap selections (0-9)
  • Film force to load control
  • Visual film break alarm
  • Manual clamp jog
  • Reset function
  • Manual function for table fwd/rev, carriage up/down
  • All conveyor sections fwd/rev
  • 15 Intuitives alarms diagnostic
  • Positive turntable home position braking system
  • Air pressure switch
  • Double brush dust tight slip ring
  • On screen wrapping performance analysis
  • On screen maintenance program and instructions
Electrical Requirements:
  • 230 Volt, 3 Phase, 60 Hz, 20Amps
Pneumatic Requirements:
  • 3 CFM @ 80 PSI comes with FRL (Filter, Regulator, Lubricator)
Warranty:
  • All Wulftec-automatic machines come with a three year warranty.
  • 25" ring gear bearings are warranted for ten years.
  • All Wulftec prestretch rubber rollers have a three year warranty.
* Optional
 


©2011 Millwood, Inc. Policies  Web Map  Newsletter Signup  Employment