WCRT-200

Heavy Duty Conveyorized Automatioc Rotary Arm

Capacities
WCRT-200
Production:
  • 65 loads per hour
  • NOTE: Base on load size and configuration
Load Size:
  • 50" (W) x 50" (L) x 80" (H)
Load Weight:
  • 4,000 lbs.
Machine Dimensions:
  • 172" (W) x 141" (L) x 132" (H)
Features
Structure:
  • Free standing integrated leg design
  • Heavy duty structural steel construction
  • Heavy duty safety fencing with one interlocked access door enclosing the wrapping zone
  • Easy access to all components
Rotary Arm:
  • All structural steel construction
  • (4) 6" X 6" floor mounting legs
Rotary Arm Drive:
  • 25" Ring Gear Bearing drive/support
  • Automated Lube Station.
  • Max. 17 RPM variable speed
  • 1 HP AC motor with variable frequency vector drive
  • Electronic soft start/stop
  • Positive arm alignment controlled by proximity sensor
  • Protection guard over the ring gear bearing
  • Dynamic braking system for rotary arm
Film Delivery System:
  • 20" NO-THREAD® Powered Pre-Stretch Carriage
  • ½ HP AC Motor with Variable Frequency Drive
  • 50% to 300% Pre-stretch Ratio (preset to customer specifications, Std. 200%)
  • Electronic film tension control with analog sensor
  • Lexan roller cover
  • Film force release for easy pull at start and end of cycle
  • Angled carriage to wrap approximately 2" from conveyor level
Film Carriage Drive:
  • ¾ HP AC Motor with Variable Frequency Drive
  • Two #50 Chain Carriage Lifts for Safety
  • Dual ½" CRS ways with UHMW-PE Carriage Glides
  • Dual structural steel boom
  • Efficient and reliable flat cable with power track guidance
Film Tail Treatment:
  • Automatic film clamping
  • Pulsed controlled film cutter
  • Film alignment arm
  • Brush-on film tail treatment, Heat Seal available *
Conveyor:
  • Powered process conveyor, 11' 6" long
  • Standard: Pass height 18", other pass heights available *
  • 1/8" wall cold rolled electric welded steel rollers
  • 2 ½" dia. rollers on 3" centers
  • 52" BFR (between frame rails)
  • All rollers driven via #40 chain
  • ¾ HP AC motor with variable frequency drive
  • Heavy duty structural steel design
  • Heavy duty cast iron flange mounted bearings
  • Up to 35 feet per minute, other speeds available *
  • Additional conveyors and other types available upon request. *
Controls:
  • Siemens PLC S7-300
    *Allen Bradley SLC 5/03 PLC, also available at minimum upcharge
  • 24V control system
  • Current overload protection
  • Nema 12 control cabinet with quick disconnect
  • Auto-height sensing photoeye with on/off mode
  • Power on/off lockable switch and indicator light
  • 1 E-STOP mushroom type push button on the control panel and one in the wrapping zone
  • Siemens monochrome Touch Panel
  • Variable rotary arm speed (17 RPM)
  • Separate up and down carriage speeds
  • Separate top and bottom wrap selections (0-9)
  • Positive arm alignment
  • Film force to load control
  • Double brush dust tight slip ring
  • Emergency stop sensor for arm path obstruction
  • Dynamic braking system for rotary arm
  • Visual film break alarm
  • Manual clamp jog
  • Manual function for rotation fwd/rev, carriage up/down and center
  • All conveyor fwd/rev.
  • 15 Intuitives alarms diagnostic.
  • Photoeyes at each end of safety fencing
  • Reset function
  • Air pressure switch
  • On screen wrapping performance analysis
  • On screen maintenance program and instructions
Electrical Requirements:
  • 230 Volt, 3 Phase, 60 Hz, 15Amps
Pneumatic Requirements:
  • 3 CFM @ 80 PSI comes with FRL (Filter, Regulator, Lubricator)
Warranty:
  • All Wulftec automatic machines come with a three year warranty.
  • All 25" ring gear bearings are warranted for ten years.
  • All Wulftec prestretch compound rollers have a lifetime warranty.
* Optional
 


©2011 Millwood, Inc. Policies  Web Map  Newsletter Signup  Employment